grf1?p?c?04?0600?c1?s?s grf1?p?c?08?1000?c1?s?s optional captive panel screws high performance 26 awg rg 316 coax cable single or double ended 2, 4, 6 or 8 positions mmcx-scale connectors www.samtec.com 50 ganged rf cables grf1-c series grf1 p no. of positions ?02, ?04, ?06, ?08 screw option end option c assembled length ?s = single ?d = double ?s = captive panel screws (leave blank for no screw option) ??xxxx? = assembled length in millimeters ?0100 to ?1000 (100mm) 3.94" minimum (28,58) 1.125 (15,50) .610 no. positions x (5,00) .197 + (11,60) .457 assembled length = xxxx (2,77) .109 (6,00) .236 (no. of positions -1) x (5,00) .197 (8,89) .350 key up end 1 key down end 2 no. positions x (5,00) .197 + (4,60) .181 (no. of positions x (5,00) .197) + (7,20) .283 ?d?s ?d ?s option shown for complete speci cations see www.samtec.com? grf1-c shell material: brass insulator material: te o n contact material: becu pin material: brass plating: 30? (0,76?) au over 50? (1,27?) ni operating temp range: -40? to +90? impedance: 50 rohs compliant: ye s rg 316 cable: impedance: 50 capacitance: 96.432pf/meter propagation delay: 4.83 nsec/meter max attenuation (cable only): 1.25db @ 1ghz for 1 meter conductor size: 26 awg, (0,51mm) .020" dia. conductor material: silver plated copper conductor resistance: 0.13 /meter max current rating: 5a insulator diameter: (1,52mm) .060" insulator material: ptfe dielectric constant: 2.1dk shield material: silver plated copper clad steel jacket material: fep jacket diameter: (2,54mm) .100" jacket temp rating: -50? to +250? typical bend radii: (6,48mm) .255" rohs compliant: ye s ?d?s ?d mates with: grf1-j also available application tooling. contact atg@samtec.com for more information. board-to-board system. see grf1-j & grf1-p series. note: this series is non-standard, non-returnable. note: cable lengths longer than 40.00" (1 meter) are not supported with s.i. test data. c1 specifications f-209 supplement
|
